Automatic paint spraying machine need to pay attention to the details of the use of the process

Automatic paint spraying machine these details to pay attention to: a medium-sized automatic paint spraying machine although the footprint is not large, the spraying capacity is not very high, but in the paint work more cover the area of the workpiece in the drum, if you look carefully and notice these problems.

      When the workpiece is put into the paint spraying machine, each workpiece must be pre-treatment needs to be finished. Pre-treatment efforts to do no oil, no dust, no debris. By the time your paint spraying machine is finished, you will find that the workpiece without pretreatment will be highlighted a small particle or not covered with paint. This can only be used, and it is impossible to re-wash the defective workpiece and re-spray, which costs more investment.

       Set the parameters of the machinery must be in accordance with the instructions of the after-sales staff of the paint spraying machine, the parameters are not correct to cause problems with the workpiece out of the equipment is often the case. Spray gun needs to be cleaned according to the process, after the work if you do not promptly finish cleaning the residue of the gun, wait until the next time you want to use it is already filled with paint that has dried, the activity is all clogged.

       If you need to buy automatic paint spraying machine equipment, you can call our official website for advice, where the purchase of equipment in our factory, we are providing guidance and installation services, very convenient.

Translated with www.DeepL.com/Translator (free version)