Easy troubleshooting of automatic rolling spraying machine

Automatic rolling spraying machine simple failure, in fact, we can easily solve and eliminate before we work, as long as we can carry out a certain degree of understanding and knowledge of the machine, joint our following recommendations you will not be difficult to eliminate some simple failure:.

    1. Automatic rolling spraying machine gun does not spray oil

    Exclusion method:

    a. Check that the oil pump has no oil, air pressure and oil pressure valve is adjusted to a certain pressure, the oil circuit is not blocked and cleaned;

    b. gun start gun switch is high enough (generally adjusted to 3-4kg/cm2 or so), press the start of the gun ejector pin has not popped up; if still not out of oil, clean the gun internal and gun cap, pay attention to the gun oil seal can not be immersed in toluene and other corrosive liquids, to prevent deformation damage

    2. Automatic rolling spraying machine does not respond to the boot

   a. Whether the main wire is open to the leakage switch, that is, and rats and so chewed off, the need to replace the main wire.

   b. Check whether the robot has an alarm signal, according to the alarm signal to professional maintenance personnel to solve.

The last is to do a good job of cleaning and maintenance of the paint spraying machine itself, which is also quite important, can not be perfunctory.

Dongguan Mayo Precision Equipment Manufacturing Co., Ltd. is a professional manufacturer of baking and painting equipment. We have rich experience in industry products, perfect management, exquisite after-sales service and a group of professional technical research and development team. The company's products, with solid quality, with a competitive cost performance to develop the market If you have any questions, please consult the national hotline: 15374083106

Translated with www.DeepL.com/Translator (free version)